Linksys router blinking | Linksys router troubleshooting

if you are one of them who is looking for linksys router blinking or Linksys router troubleshooting then you are in the right place. 

Some Common Issues which people face and search related to Linksys Router are below:

If your linksys router blinking then it have following issue.

  • Hardware failure
  • Cable connection
  • Old dated Firmware
  • Isp problem
Read Also : How to make your own hosting server to set up a website on DigitalOcean

These are the couple of regular explanations for Linksys Router isn’t working issue. to fix this issue. you have to follow to the guidelines given underneath.

  • make sure your modem is properly connected to the internet port of the Linksys router. there might be a cable connectivity problem causing your Linksys router to blink or flash all lights. Before moving ahead, make sure all power supply is not connected properly.

  • is it true that you are getting the web on your modem? there is a probability of no web on modem. that is the reason you may be having this issue. so you should check the web status on your modem. on the off chance that there is no web on your modem. in that situation, you have to call your isp and approach them for the arrangement.

  • if you are using an old Linksys router then it Is sure you have a lol dated firmware. this issue might be identified with router firmware. so you should check for the firmware update.

  • if still your Linksys router is not working then simply reset your router using reset key which is on the router backside or in front some cases. you need to hold the reset key for some second to reset completely.
linksys router blinking
linksys router blinking
  • in some cases rest key is within the small hole in the router so you have to use a paper pin or something similar to it and keep pressing reset key.

After cautiously following all the above steps, your Linksys switch should work with no different issues.

Linksys Router Troubleshooting 

if still your Linksys router is not working then you can Check out these solutions to get your problem fixed.

Reboot your router:

Remove your router from power supply and unplugged all cables. after waiting some seconds connect all cables back to router and turn it back on.

Renew the IP addresses:

On the off chance that you actually can’t keep an Internet association for more several minutes subsequent to rebooting your router, it’s an ideal opportunity to proceed onward to the following stage. Start from here: your router gets its IP Address from the ISP modem.

Hence, take a stab at interfacing with your router’s administrator page, at that point deliver and restore its association with your modem. You may do likewise on your PCs.

Subsequently, turn off the PCs, the router, and the modem. Stand by a moment to turn on the ISP modem. At the point when the status lights demonstrate it’s prepared, additionally turn on the router. Following a 60 seconds break, at last turn on your PCs.

 Reset Linksys to its factory default settings:

You can also try to reset the router to its factory default settings. With the Power LED of the router blinking, press Reset button. Hold it down for 40 to 50 seconds to get router reset.

If this post “linksys router blinking” or “linksys router blinking” is useful for you or if you have any query please let us know in the comment section!

Leave a Reply